|
|
 |
Dish 1000.2 Turbo HD
Price: $134.95
|
 |
Dish 1000.2 HD is used for receiving satellites 110, 119 and 129 HD. Dish 1000.2 HD can be used for Dish Network and Free to air system.
The DISH 1000.2 satellite dish antenna uses an integrated three orbital location DISH Pro Plus LNBF to receive signal from 110°W, 119°W, and 129°W DBS orbital locations. The DISH 1000.2 reflector is slightly larger than a DISH 1000 reflector. For additional information and detailed installation instructions, refer to DISH 1000.2
(Parts are not interchangeable with other dishes)
· Three receiver output ports support a combination of DISH Pro Plus, DISH Pro, and Legacy receivers, including up to three DISH Pro Plus (dual-tuner) receivers when used with DISH Pro Plus Separators.
· While Legacy receivers are supported without a DISH Pro Adapter, at least one DISH Pro or DISH Pro Plus receiver must be connected and powered at all times to power the LNBF.
LNB IN port supports adding a fourth orbital location. The LNB IN port is operational only when receiver output ports are connected directly to satellite receivers. It is disabled when the receiver output ports are connected to a switch.
The default output of the receiver ports is 119° on PORT 1, 110° on PORT 2 and 129° on PORT 3. Note that the output ports do not follow the feed horns, but rather allow for PORT 1 to be used for peaking on 119°, similar to other LNBFs.
This dish will replace and outperform the Dish 1000. It has bigger surface and better LNBF with integrated switch |
|
E-mail a friend about this item.
Return to Catalog
|
